Views: 0 Author: Site Editor Publish Time: 2021-12-11 Origin: Site
The stamping process is a metalworking method based on the plastic deformation of metal, using a die and stamping equipment to apply pressure to the sheet, causing plastic deformation or separation of the sheet, thus obtaining parts with a certain shape, size and performance. With the rapid development of industrial technology, more and more industries are using the stamping process, which has led to an increasing demand for stamping parts.
Why use stamping parts?
The social demand for stamping parts
What are the material requirements for stamping parts?
As a result of such superiority of stamping parts, stamping processes are used in a wide range of applications in all areas of the national economy. Stamped parts have many advantages, for example, they have high dimensional accuracy, uniformity of size in the same mould and good interchangeability. The general assembly and use requirements can be met without further machining. At the same time, compared with castings and forgings, stamped parts are thin, homogeneous, light and strong.
Today, stamping parts are used in the mechanical, agricultural, electronic, information, railway, post and telecommunications, transport, chemical and medical appliance industries. It is no exaggeration to say that not only is it used throughout industry, but that everyone is directly connected to stamped products. Although there are some problems and drawbacks to stamping. For example, the noise and vibration generated during presswork are two public hazards. However, with the development of technology, these problems will be solved in the future. As a result, the social demand for stamping parts will continue to grow.
Accurate thickness is the primary condition for the stamping parts. If the die for stamping is precise and the clearance is small, the thickness of the sheet will increase the deformation force and cause jamming. If the situation is serious to the words, even the concave die will be swollen and cracked; the plate material is too thin will affect the quality of the finished product and even appear to be pulled and cracked during deep drawing.
A smooth surface, free of spots, scars, abrasions and surface cracks, is the basis for good quality in stamping parts. All surface defects will remain on the surface of the finished workpiece, and cracked defects may expand to the deep and wide in the process of bending, deep drawing and forming, causing scrap.
Stamping its application is mainly reflected in the field of industrial manufacturing, the modern manufacturing industry is nowhere its figure. Through the above introduction, do you have a better understanding of stamping parts? Dongguan Maxswall as one of the subsidiaries with rich experience in one-stop service for nameplates, hardware stamping parts, machined parts, LOGO and assembly. Our company has a professional team and rich operational experience, Maxswall has a strict quality control of any product. We insist on the principle of "honesty, cooperation and win-win" and the corporate culture of "family, cohesion, morality and attitude". If you need more information about our products, please contact us and we will provide you with the best service.